{"id":2155,"date":"2024-11-28T14:57:08","date_gmt":"2024-11-28T14:57:08","guid":{"rendered":"https:\/\/mmturbo.com\/?page_id=2155"},"modified":"2024-11-29T14:05:23","modified_gmt":"2024-11-29T14:05:23","slug":"plastic-mould-steel","status":"publish","type":"page","link":"https:\/\/786fumigations.com\/mmtturbo\/plastic-mould-steel\/","title":{"rendered":"Plastic Mould Steel"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Plastic Mould Steel<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

P20<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tP20 steel is a highly versatile engineering material. It is referred as a normal level plastic mould\nsteel in pre-hardened condition. It can also be case hadened or nitrided to achieve maximum\nsurface hardness. Typical applications for this steel include Bolsters, machine cut plastic moulds,\ninjection mloulds, die holders & deep set moulds.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

We are keep plates of this grade in stock on regular basis.<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

P20\/ DIN 2311 Chemical Composition\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\r\n \r\n \r\n \r\n
C<\/th>\r\n Si<\/th>\r\n Mn<\/th>\r\n P<\/th>\r\n S<\/th>\r\n Cr<\/th>\r\n Mo<\/th>\r\n <\/tr>\r\n
0.35 - 0.45<\/td>\r\n 0.20 - 0.40<\/td>\r\n 1.30 - 1.60<\/td>\r\n 0.03<\/td>\r\n 0.03<\/td>\r\n 1.80 - 2.10<\/td>\r\n 0.15 - 0.25<\/td>\r\n <\/tr>\r\n <\/table>\r\n<\/div>\r\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

P20 + Ni\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tP20 + Ni is a plastic mould tool steel, used mainly for plastic injection die moulds. It can taken as\nadvanced version of P20 having around 1% of Nickle content having a positive impact on strength\nand hardenability. It also has better polishability thus giving better production quality of moulds. \t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tMajor applications include die casting dies for Zinc, injection moulds, synthetic plastic moulds\nespecially for large plastic moulds highly stressed in core. \t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

We are keeping plates of this grade in stock on regular basis.<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tMajor applications include die casting dies for Zinc, injection moulds, synthetic plastic moulds\nespecially for large plastic moulds highly stressed in core. \t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

P20+Ni\/ DIN 2738 Chemical Composition<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\r\n \r\n \r\n \r\n
C<\/th>\r\n Si<\/th>\r\n Mn<\/th>\r\n P<\/th>\r\n S<\/th>\r\n Cr<\/th>\r\n Ni<\/th>\r\n Mo<\/th>\r\n <\/tr>\r\n
0.35-0.45<\/td>\r\n 0.20-0.40<\/td>\r\n 1.30-1.60<\/td>\r\n 0.03 max<\/td>\r\n 0.03 max<\/td>\r\n 1.80-2.10<\/td>\r\n 0.9-1.20<\/td>\r\n 0.15-0.25<\/td>\r\n <\/tr>\r\n <\/table>\r\n<\/div>\r\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

SS1.2316 \n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t1.2316 steel is a chromium-molybdenum steel which also referred as stainless steel plastic mould\nsteel with improved corrosion resistence properties. It oiers good polishability, toughness and heat\nresistant while alsobeing wear resistant. It is normally viewed one of the best steel for platic mould\napplicaations especially in humid environment. \t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tIt is mainly used for plastic injection moulds, in connection with chemically aggressive and acidic\nplastics such as thermoplastics & for PVC arminoplastics, extrusion tools, compressor parts and\nfor special machine parts in the food industry\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

We are keeping round bars and plates of this grade on regular basis.<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

DIN 1.2316 equivalent grades: X38CrMo16\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
Typical chemical composition of 1.2316 Mould Steel<\/th>\r\n <\/tr>\r\n
C<\/th>\r\n Si<\/th>\r\n Cr<\/th>\r\n Mo<\/th>\r\n Mn<\/th>\r\n P<\/th>\r\n S<\/th>\r\n Ni<\/th>\r\n <\/tr>\r\n <\/thead>\r\n
0.33-0.45%<\/td>\r\n 1.00% max<\/td>\r\n 15.50-17.50%<\/td>\r\n 0.80-1.30%<\/td>\r\n 0-1.50%<\/td>\r\n 0.03% max<\/td>\r\n 0.03% max<\/td>\r\n 1.00% max<\/td>\r\n <\/tr>\r\n <\/tbody>\r\n <\/table>\r\n<\/div>\r\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Heat treatment:\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

already pre-toughened; usually no heat treatment required<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Soft annealing:\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t760 to 800 \u00b0C for about 4 to 5 hours; slow controlled cooling of 10 to 20 \u00b0C per hour to about 650 \u00b0C;\nfurther cooling in air, max. 230 HB\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Hardening:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t1030 to 1050 \u00b0C,15 to 30 minutes keeping curing temperature, quenching in water\/oil\nobtainable hardness: 50-54 HRC\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Tempering:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tSlow heating to tempering temperature immediately after hardening. Minimum time in furnace: 1\nhour per 25 mm part thickness\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Plastic Mould Steel P20 P20 steel is a highly versatile engineering material. It is referred as a normal level plastic mould steel in pre-hardened condition. It can also be case hadened or nitrided to achieve maximum surface hardness. Typical applications for this steel include Bolsters, machine cut plastic moulds, injection mloulds, die holders & deep set moulds. We are keep plates of this grade in stock on regular basis. P20\/ DIN 2311 Chemical Composition C Si Mn P S Cr Mo 0.35 – 0.45 0.20 – 0.40 1.30 – 1.60 0.03 0.03 1.80 – 2.10 0.15 – 0.25 P20 + Ni P20 + Ni is a plastic mould tool steel, used mainly for plastic injection die moulds. It can taken as advanced version of P20 having around 1% of Nickle content having a positive impact on strength and hardenability. It also has better polishability thus giving better production quality of moulds. Major applications include die casting dies for Zinc, injection moulds, synthetic plastic moulds especially for large plastic moulds highly stressed in core. We are keeping plates of this grade in stock on regular basis. Major applications include die casting dies for Zinc, injection moulds, synthetic plastic moulds especially for large plastic moulds highly stressed in core. P20+Ni\/ DIN 2738 Chemical Composition C Si Mn P S Cr Ni Mo 0.35-0.45 0.20-0.40 1.30-1.60 0.03 max 0.03 max 1.80-2.10 0.9-1.20 0.15-0.25 SS1.2316 1.2316 steel is a chromium-molybdenum steel which also referred as stainless steel plastic mould steel with improved corrosion resistence properties. It oiers good polishability, toughness and heat resistant while alsobeing wear resistant. It is normally viewed one of the best steel for platic mould applicaations especially in humid environment. It is mainly used for plastic injection moulds, in connection with chemically aggressive and acidic plastics such as thermoplastics & for PVC arminoplastics, extrusion tools, compressor parts and for special machine parts in the food industry We are keeping round bars and plates of this grade on regular basis. DIN 1.2316 equivalent grades: X38CrMo16 Typical chemical composition of 1.2316 Mould Steel C Si Cr Mo Mn P S Ni 0.33-0.45% 1.00% max 15.50-17.50% 0.80-1.30% 0-1.50% 0.03% max 0.03% max 1.00% max Heat treatment: already pre-toughened; usually no heat treatment required Soft annealing: 760 to 800 \u00b0C for about 4 to 5 hours; slow controlled cooling of 10 to 20 \u00b0C per hour to about 650 \u00b0C; further cooling in air, max. 230 HB Hardening: 1030 to 1050 \u00b0C,15 to 30 minutes keeping curing temperature, quenching in water\/oil obtainable hardness: 50-54 HRC Tempering: Slow heating to tempering temperature immediately after hardening. Minimum time in furnace: 1 hour per 25 mm part thickness<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"tpl-default-elementor.php","meta":{"footnotes":""},"class_list":["post-2155","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/pages\/2155","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/comments?post=2155"}],"version-history":[{"count":22,"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/pages\/2155\/revisions"}],"predecessor-version":[{"id":2319,"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/pages\/2155\/revisions\/2319"}],"wp:attachment":[{"href":"https:\/\/786fumigations.com\/mmtturbo\/wp-json\/wp\/v2\/media?parent=2155"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}